Panasonic Panafax UF-S2

ADVANCED FEATURES |
hd
Digital
Telephone
Answering
System
Setting TAM from Remote Station
{f
you
forget
to
set
your
apparatus
to
use
TAM,
you
can
set
it
remotely.
(See
Note
1)
You
must
set
the
Remote
Password
(in
the
TAM
SETTING),
"IN/OUT
Remote
Set”
to
“ON”
(in
the
TAM
SETTING).
When your apparatus is set" MANUAL RCV” at "IN
Mode”.
When your apparatus is set "FAX/TEL” at "IN
Mode”. (See Note 2)
1
2
NO o1 sf
Call your apparatus from a remote
location.
Your apparatus will answer after 15
rings.
@
and after you hear a long beep, dial the
Remote Password and [#] button within
10 seconds.
(You must use Tone dialing.)
E:T 2ISIAE]
When the password is matched, you will
hear a short beep.
@Ow
Your apparatus is now set to OUT Mode.
cts
Replace the handset.
’
'
‘
'
,
'
t
'
'
'
‘
'
'
‘
NO oF fF
Call your apparatus from a remote
location.
Your apparatus answers. During the
greeting message. (F/T First OGM)
@
and after you hear a long beep, dial the
Remote Password and [#] button within
10 seconds.
(You must use Tone dialing.)
oR PANES
When the password is matched, you will
hear a short beep.
O®
Your apparatus is now set to OUT Mode.
ots
Replace the handset.
LH Note: 1. if the memory is full, the setting of the apparatus cannot be changed. Please play back and erase the
59
message before doing this operation.
2. If the memory is full, it requires 15 rings to make the apparatus answer.