Panasonic PT-AE2000E

Appendix
Technical Information
52 - ENGLISH
Specifications
Power supply AC 100 - 240 V 50 Hz/60 Hz
Power consumption
240 W
During standby (when fan is stopped): 0.08 W
Amps 2.8 A - 1.2 A
LCD panel
Panel size (diagonal) 0.74 type (17.78 mm)
Aspect ratio 16 : 9
Display method 3 transparent LCD panels (RGB)
Drive method Active matrix method
Pixels 2 073 600 (1 980 x 1 080) x 3 panels
Lens
Manual zoom (2x)/Manual focus
F 1.9 - 3.2, f 22.4 mm - 44.8 mm
Lamp UHM lamp (165 W)
Luminosity 1 500 lm
Operating environment
Temperature
0 °C - 40 °C (32 °F - 104 °F)
When the ALTITUDE (page 41)
is set to ON: 0 °C - 35 °C (32 °F -
95 °F)
Humidity 20% - 80% (no condensation)
Scanning
frequency
*1
(for RGB signal)
*1. See “List of compatible signals” on page 47 for available signals.
Horizontal scanning
frequency
30 kHz - 70 kHz
Vertical scanning
frequency
50 Hz - 85 Hz
Dot clock frequency Less than 150 MHz
COMPONENT (YPBPR) signals
525i (480i), 525p (480p), 625i (576i), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1 125 (1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p, 1 125 (1 080)/50p, 1 125 (1 080)/24p
Colour system 7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL60/SECAM)
Projection size 40" - 200" (1 016 mm - 5 080 mm)
Throw distance 1.2 m - 12 m (3'11" - 39'4")
Screen aspect ratio 16 : 9
Installation
FRONT/DESK, FRONT/CEILING, REAR/DESK, REAR/CEILING
(Menu selection method)