Need help?Do you have a question about the Panasonic PT-AE700 and is the answer not in the manual?
Apparatus must be earthed; avoid exposure to rain or moisture.
Safety instructions and wiring code for the UK moulded plug.
Avoid damaging the mains lead or plug to prevent shocks or fire.
Do not use in bathrooms, humid places; avoid looking into lens or touching hot ports.
Handle batteries carefully; do not place weight on projector, disconnect power for cleaning.
Avoid touching during thunderstorms; service periodically.
Explains the four projection methods: Front-desk, Front-ceiling, Rear-desk, Rear-ceiling.
Illustrates projector placement and provides projection distance charts.
Ensure devices are connected, mains lead attached, and lens cover removed.
Steps to turn on the projector, connected devices, and select input signal.
Guide to adjusting lens shift, angle, size, and focus for initial setup.
Steps to turn off the projector using the power button and main switch.
How to restore settings to factory default using the NORMAL button.
Adjusting CONTRAST, BRIGHT, COLOUR, TINT, SHARPNESS, COLOUR TEMP.
Explains causes and remedies for the TEMP indicator being illuminated or flashing.
Explains causes and remedies for the LAMP indicator being illuminated or flashing.
Step-by-step instructions on how to remove, clean, and reinstall the air filter.
Caution regarding the hot lamp cover and handling the glass lamp.
Detailed steps for safely replacing the projector lamp unit.
Checks for power-related problems and no picture appearing.
Troubleshooting fuzzy pictures or pale/grayish colors.
Checks for remote control operation failures or incorrect signal display.
To Next Page
General