Panasonic PT-AE900U

14
15
■ Deleting button functions one by one (DELETE)
2
3
4
1
Press [SETUP] for 3 seconds or more.
Select “USER 1-3” and then press [ENTER].
Select “DELETE?” and then press [ENTER].
Press the button to be deleted.
(Example: When “USER1” is selected)
■ Deleting all settings for USER 1-3 (OPS RESET)
2
3
4
1
(Example: When “USER1” is selected)
Deleting home theatre equipment remote control signals
You can use either of two methods to delete remote control signals that have been
recorded (learnt): by deleting button functions one by one (DELETE), or by deleting all
settings for USER 1-3 (OPS RESET).
To finish, press [SETUP].
Press [SETUP] for 3 seconds or more.
Select “USER 1-3” and then press [ENTER].
Select “OPS RESET?” and then press [ENTER].
Press [ENTER].
To finish, press [SETUP].
✱
If “ERROR” is displayed
“ERROR” will be displayed if no function has been learnt.
✱ To delete another button, repeat step 4.
Note:
B If device codes have already been entered for USER 1-3, the device codes
will not be deleted.
Example: When deleting the function of the
playback button
()