Panasonic PT-AE900U

16
Changing the LCD display contents
17
2
3
5
1
Example: When
“USER1” is selected
()
4
: Display position
: Character select
When remote control signals for a home theatre system device have been learnt for the
USER 1-3 function buttons, you can change the “-A-, -B-, -C-” displays on the LCD to your
preferred displays.
List of characters that can be displayed
Upper-case letters: A-Z Numerals: 0-9 Symbols: -, +, _, ✱, ?, space
Press [SETUP] for 3 seconds or more.
Select “USER 1-3” and then press [ENTER].
Select “KEY EDIT?” and then press
[ENTER].
Press the button to be changed.
Use the left and right keys to move to the
character to be changed, and use the up
and down keys to select the character.
6
Press [ENTER].
✱ During setting, the space character will be displayed
as “ ”.
✱ To edit another character display, repeat steps 4 and
5.
(Example: When function B has been selected)
To finish, press [SETUP].