Store
Save the network settings.
Press ▲▼ to select [Store].1 )
Press ► to display the setting dialog 2 )
box.
Press ▲▼ to switch [Yes]/[No].3 )
Press ► to execute.4 )
Press <MENU> to exit.5 )
Reset
Return all data that has been set in the [Setting] menu
to the factory defaults.
Press ▲▼ to select [Reset].1 )
Press ► to display the setting dialog box.2 )
Press ▲▼ to switch [Yes]/[No].3 )
Press ► to execute.4 )
Select [Yes] to start executing and the resting
z
message appears. The reset procedure nishes
when the message disappears.
To Next Page