(2) Loosen the 3 screws until they idle and remove the lamp unit 2.
Note:
·
When installing the lamp unit in the main unit, place it in
a specified position and press the back of the lamp unit
(arrow positions shown in right figure), and confirm the
lamp unit is inserted securely.
Then, tighten the 3 screws fixing the lamp unit and close
the lamp unit cover.
12.22. Removal of Iris Unit
(1) Remove the upper case according to the section 12.2. "Removal
of Upper Case".
(2) Unscrew the 2 screws and remove the dynamic iris cover.
42
PT-D10000U / PT-D10000E / PT-DW10000U / PT-DW10000E
To Next Page
Loading...
