(1) Remove the projection lens according to the section 12.20.
"Removal of Projection Lens".
(2) Remove the upper case according to the section 12.2. "Removal
of Upper Case".
(3) Unscrew the 4 screws and remove the DMD duct block.
(4) Unscrew the 3 screws and release the block of liquid cooling unit
radiator and reserve tank.
(5) Unscrew the 2 screws and remove the mechanical shutter.
(6) Unscrew the 3 screws and remove the DMD block and liquid
cooling unit.
47
PT-D10000U / PT-D10000E / PT-DW10000U / PT-DW10000E
To Next Page
Loading...
