Chapter 5 Maintenance — Self-diagnosis display
ENGLISH - 191
Error/warning display Details Measure
UA1 FPGA temperature warning
f The operating environment temperature is too
high. Use the projector in an appropriate operating
environment temperature
*1
.
UA4 Power supply temperature error
UA5 FPGA temperature error
H01 Battery replacement for the internal clock
f Battery replacement is required. Consult your
dealer.
H11 Intake temperature sensor not present
f If the display does not clear after switching the
main power off and on, consult your dealer.
H12 Optical module temperature sensor not present
H13 Exhaust air temperature sensor not present
H18 Clog sensor not present
F00 Liquid cooling pump R warning
f If the display does not clear after switching the
main power off and on, consult your dealer.
F01 Liquid cooling pump G warning
F02 Liquid cooling pump B warning
F11 Shutter error
F12 Dynamic iris error
F13 Air lter unit error
F15 Luminance sensor error
F16 Angle sensor error
F41 Lamp 1 memory error
f The lamp unit is broken. Consult your dealer.
F42 Lamp 2 memory error
F43 Lamp 3 memory error
F44 Lamp 4 memory error
F50 Exhaust fan 1 warning
f If the display does not clear after switching the
main power off and on, consult your dealer.
F51 Exhaust fan 2 warning
F52 Exhaust fan 3 warning
F53 Exhaust fan 4 warning
F54 Intake fan 1 warning
F55 Intake fan 2 warning
F56 Lamp 1 fan warning
F57 Lamp 2 fan warning
F58 Lamp 3 fan warning
F59 Lamp 4 fan warning
F61 Lamp 1 power supply communication error
F62 Lamp 2 power supply communication error
F63 Lamp 3 power supply communication error
F64 Lamp 4 power supply communication error
F70 Lamp 1 power supply fan warning
F71 Lamp 2 power supply fan warning
F72 Power supply fan warning
F73 Signal fan warning
F74 Lamp 1/2 relay fan warning
F75 Lamp 3/4 relay fan warning
F76 Color prism fan 1 warning
F77 Color prism fan 2 warning
F78 Color prism fan 3 warning
F79 Color prism fan 4 warning
To Next Page
Loading...
