(13) Unscrew the 2 screws and remove the ballast fan.
(14) Disconnect the connectors to the ballast-1 and ballast-2 units.
(15) While sliding the ballast-1 and ballast-2 units mutually,
disconnect their hooks and separate the units.
Note:
·
Work carefully not to deform the ballast unit case (A,
B).
(16) Unscrew the 4 screws and remove the ballast module.
27
PT-D5700U / PT-D5700E / PT-D5700UL / PT-D5700EL / PT-DW5100U / PT-DW5100E / PT-DW5100UL / PT-DW5100EL
To Next Page
Loading...
