Panasonic PT-DW750

Chapter 6 Appendix — Technical information
ENGLISH - 177
Control details Performance Parameter Default value Remark
GEOMETRY
OFF 0-15
255
To use PC-1, PC-2, and PC-3, the
optional Upgrade Kit (Model No.:
ET-UK20) is required.
KEYSTONE 16-31
CURVED 32-47
PC-1 (Only for PT-DZ780) 48-63
PC-2 (Only for PT-DZ780) 64-79
PC-3 (Only for PT-DZ780) 80-95
CORNER CORRECTION 96-111
No operation 112-255
FREEZE
No operation 0-31
128 ―
OFF 32-95
No operation 96-159
ON 160-223
No operation 224-255
COLOR
TINT
No operation 0-31
0 ―
Factory default setting 32-63
- 31 64-65
… …
0 128-129
… …
+31 190-191
No operation 192-255
RASTER PATTERN
No operation 0-15
0 ―
OFF 16-31
WHITE 32-47
YELLOW 48-63
CYAN 64-79
GREEN 80-95
MAGENTA 96-111
RED 112-127
BLUE 128-143
BLACK 144-159
USER LOGO 160-175
No operation 176-255
ENABLE / DISABLE
Disable 0-127
0
When “Disable” is set, operations
of all channels become
unacceptable.
Enable 128-255
Note
f If the projector is operated with the remote control or on the control panel, or by the control command while controlling the projector using
the Art-Net function, the setting of the DMX controller or computer application may be different from the projector status. To reect the
controls of all channels to the projector, set “ENABLE / DISABLE” of channel 11 to “Disable” and then set back to “Enable”.
f To create/register the USER LOGO image, use “Logo Transfer Software” included in the supplied CD-ROM.
Control commands via LAN
When web control administrator rights password is set (Protect mode)
Connecting
1) Obtain the IP address and port number (Initial set value = 1024) of the projector and request a
connection to the projector.
f You can obtain both the IP address and the port number from the menu screen of the projector.
IP address
Obtain from the [NETWORK] menu → [NETWORK STATUS]
Port number
Obtain from the [NETWORK] menu → [NETWORK CONTROL] → [COMMAND PORT]
2) Check the response from the projector.