Panasonic PT-DW750

Chapter 3 Basic Operations — Projecting
64 - ENGLISH
Note
f Complete the operation within approximately 5 seconds after the [HOME POSITION] screen is displayed. The [HOME POSITION] screen
will disappear after time limit.
f The home position of the lens is the lens position when the lens is being replaced or when the projector is being stored, and it is not the
optical center of the screen.
f You can also display the [HOME POSITION] screen by pressing the <LENS> button on the control panel or the <SHIFT> button on the
remote control for at least three seconds.
Adjustment range by the lens position shift (optical shift)
Perform the lens position shift within the adjustment range.
The focus may change when the lens position is shifted out of the adjustment range. This is because the
movement of the lens is restricted to protect the optical parts. Projection position can be adjusted with the
optical axis shift function based on the position of the projected screen in the home position (standard projection
position).
Lens type
Zoom lens
Standard zoom lens, ET-DLE150, ET-DLE250,
ET-DLE350, ET-DLE450
ET-DLE080, ET-DLE085
PT-DZ780
Standard projection position
Projected image height V
Projected image width H
0.5 V0.16 V
0.1 H
0.3 H
0.1 H
Standard projection position
Projected image height V
Projected image width H
0.5 V0.16 V
0.1 H
0.28 H
PT-DW750
Standard projection position
Projected image height V
Projected image width H
0.6 V0.16 V
0.1 H
0.3 H
0.1 H
Standard projection position
Projected image height V
Projected image width H
0.6 V0.16 V
0.1 H
0.28 H
PT-DX820
Standard projection position
Projected image height V
Projected image width H
0.5 V0.13 V
0.1 H
0.3 H
0.1 H
Standard projection position
Projected image height V
Projected image width H
0.45 V0.13 V
0.1 H
0.28 H
Note
f When the optional xed-focus lens (Model No.: ET-DLE055) is attached, do not use the shift adjustment, and use the projector with the lens
position at the home position.