NETWORK menu (continued)
NETWORK STATUS
Displays the current network status.
Press ▲▼ to select [NETWORK STATUS], and press <ENTER> button.
Switch between the wired LAN screen and the wireless LAN screen with ◄► buttons.
NETWORK
PROJECTOR NAME NAME1234
WIRED LAN
WIRELESS LAN
USER1
NETWORK CONTROL
NETWORK PASSWORD
OFF
NETWORK PASSWORD CHANGE
LIVE MODE CUT IN OFF
COMPUTER SEARCH
MULTI -LI VE
NETWORK STATUS
MENU SELECT
SUB MENU
The status of the following will appear.
PROJECTOR NAME (See page 10)
NETWORK ID Even if there are two or more projectors with the same name, an ID ([Proj] + 4-digit
number) is assigned to each projector to enable the projectors to be identied.
WIRED LAN
DHCP “ON”–“OFF”
IP ADDRESS (See page 11)
SUBNET MASK (See page 11)
DEFAULT GATEWAY (See page 11)
DNS1 —
DNS2 —
MAC ADDRESS
_
—
WIRELESS LAN
ANTENNA LEVEL (The strength of the connection
will appear.)
NETWORK “S-MAP”,“1”–“4”, “USER1”–
“USER3”
MODE “AD HOC”–
“INFRASTRUCTURE”
CHANNEL Refer to page 6 for usable
channels.
SSID (See page 13)
AUTHENTICATION “OPEN”–
“SHARED”–
“WPA-PSK”–
“WPA2-PSK”
ENCRYPTION “NONE”–“WEP”–“TKIP”-“AES”
DEFAULT KEY “-”–“1”–“4”
DHCP “ON”–“OFF”
IP ADDRESS (See page 13,15)
SUBNET MASK (See page 13,15)
DEFAULT GATEWAY (See page 13,15)
DNS1 —
DNS2 —
MAC ADDRESS
_
—
“Glossary” ( _ See page 40 – 41)
To Next Page
Loading...
