Panasonic PT-DZ570E

21
Using Web Browser
Accessing from the Web browser
Activate the Web browser in the personal computer.
1
Enter the IP address set by the projector into the URL input eld of the Web
2
browser.
Enter your “User name” and “Password”.
3
The factory default settings are user1 (user
privileges) or admin1 (administrator privileges) for
the use name and panasonic (lowercase letters) for
the password.
Click [OK] to display the Projector status
4
page.
Note
Avoid activating two or more Web browser simultaneously to work out setting or control actions. ・
Change the password rst of all. ・
Administrator privileges enable the use of all functions. User privileges enable the use of only “Projector status”, ・
“Network status”, “Access error log”, “Basic control”, and “Change password”.
If the password is incorrectly entered three times in a row, the lock is set for several minutes. ・
If you want to control the projector using a Web browser, set [WEB CONTROL] in the network menu to [ON]. ・