Panasonic PT-DZ570E

20
Connecting with Wireless LAN (continued)
Computer operation
Make the network setting according to your system administrator.
1
If the projector settings are the default settings (See page 15), then the computer can be used with the
following network settings.
IP ADDRESS 19 2.16 8.11.101
SUBNET MASK 255.255.255.0
DEFAULT GATEWAY 19 2.16 8.11.1
Click [Start]→[Connect To
2
_
]→[Wireless Network Connection
_
], select the wireless
network of [SSID] set with the projector, and then click [Connect
_
].
If the projector setting is the factory setting, then [SSID] is [Panasonic Projector].
The names are for Windows XP. In Windows Vista/Windows 7, the procedure will be [Start]→[Connect To]. _
Note
If you use any wireless utility other than Windows [Wireless Network Connection], follow its operation ・
procedure for connection.
If you use the access point, congure the projector and each network setting of the computer following ・
the instruction of the network administrator.