Check your computer
Necessary environment for computers to be connected
First, check your computer to see whether or not it has a wired LAN ・
_
or a built-in wireless LAN function.
“Glossary” ( _ See page 40 – 41)
Before connecting the projector to the computer, be sure to check the following settings. ・
Operation is not guaranteed for all wireless LAN adapters and built-in wireless LAN adapters. ・
Wired LAN ■
Check 1
For LAN cable
Is the cable properly connected?
・
Use LAN cable that is compatible with category 5 or above. ・
Check 2
Wired LAN settings
<Computer with a built-in wired LAN function>
Is your wired LAN switched on?
・
<Computer with a built-in wired LAN function>
Is your wired LAN adapter properly recognized? ・
Is your wired LAN adapter switched on? ・
Install the wired LAN adapter driver beforehand. ・
For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter.
Wireless LAN ■
Check 1
Wireless LAN settings
<Computer with a built-in wireless LAN function>
Is your wireless LAN switched on?
・
<Computer without a built-in wireless LAN function>
Is your wireless LAN adapter properly recognized? ・
Is the wireless LAN adapter switched on? ・
Install the wireless LAN adapter driver beforehand. ・
For details on how to install the driver, refer to the instructions accompanying the wireless card.
Check 2
Computer’s settings
When security (rewall) software and utilities for network cards are installed, these may prevent connection of
・
the projector.
<Windows XP/Windows Vista/Windows 7>
Is Network Bridge enabled?
・
Has your rewall been disabled? ・
For WebBrowser ■
WebBrowser is necessary to use WEB control. ・
Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6 ・
Compatible WebBrowser : Internet Explorer 6.0/7.0/8.0, Safari 2.0/3.0/4.0 (Mac OS) ・
Do not touch the LAN terminal or the metal part of the LAN cable, the static electricity may discharge from our
hand (body) causing a malfunction.
To Next Page
Loading...
