4. CW INDEX
When the color wheel is replaced, adjusts it with
and buttons.
a. Display the test pattern (Red & Blue pattern).
b. Confirm whether there is a horizontal line.
c. If a horizontal line is in the red area, decrease CW INDEX setting value by 1, and record the value where the horizontal line
(in both red area and blue area) disappears. (The recorded value is assumed to "A".)
d. If a horizontal line is in the blue area, increase CW INDEX setting value by 1, and record the value where the horizontal line
(in both red area and blue area) disappears. (The recorded value is assumed to "B".)
e. Set the mean value (omission below decimal point) of "A" and "B" to the CW INDEX setting value.
5. POWERONSHUTTER
·
OPEN: Opens the shutter when power ON.
·
CLOSE: Closes the shutter when power ON.
6. POWER OFF SHUTTER
·
IGNORE: Does not control the shutter when power OFF.
·
OPEN: Opens the shutter when power OFF.
·
CLOSE: Closes the shutter when power OFF.
11
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
