10.17. Removal of Rod
(1) Remove the synthesis block according to the section 10.16.
"Removal of Analysis/Synthesis Block".
(2) Unscrew the 3 screws and remove the rod.
Note:
·
Handle with care the rod not to make damage, dirt, etc
10.18. Removal of Color Wheel Block
(1) Remove the upper case according to the section 10.2. "Removal
of Upper Case".
(2) Unscrew the 1 screws and remove the color wheel cover.
(3) Unscrew the 2 screws and remove the color wheel block.
Note:
·
If the color wheel becomes dirty or damaged, the
performance may be deteriorated. Work carefully
enough in handling.
10.19. Removal of Full Reflection Mirror
(1) Remove the upper case according to the section 10.2. "Removal
of Upper Case".
(2) Unscrew the 3 screws and remove the full reflection mirror.
37
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
