10.22. Removal of Mechanical Shutter
(1) Remove the A-P.C.Board block according to the steps 1 through
3 in the section 10.3. "Removal of A-P.C.Board".
(2) Unscrew the 2 screws, and remove the 1 cable connector and
the metal partition (front).
(3) Unscrew the 5 screws and remove the lens cover.
(4) Unscrew the 2 screws and remove the mechanical shutter.
Note:
·
Be careful not to damage the shutter when removing it.
40
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
