5.1.4. Procedure of Communication Condition Settings
(1) Press the MENU button.
The MAIN MENU screen will appear.
(2) Select PROJECTOR SETUP using the or button.
(3) Press the ENTER button.
The PROJECTOR SETUP screen will appear.
(4) Select RS-232C using the or button.
(5) Press the ENTER button.
The RS-232C screen will appear.
(6) Press the or button to select communication settings.
(7) Press the or button to confirm the setting..
(8) Press the MENU button three times.
The on-screen indications disappear, and the system returns to the
normal screen.
5.1.5. Cable Specifications
16
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
