(5) Unscrew the 3 screws and remove the ballast block.
(6) Unscrew the 4 screws and remove the ballast mesh.
(7) Unscrew the 2 screws and remove the power fan.
(8) Unscrew the 4 screws and separate the ballast-1 unit and the
ballast-2 unit.
(9) Unscrew the 2 screws and remove the ballast-1 module / ballast-
2 module.
32
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
