Chapter 4 Settings — [NETWORK] menu
13 [AROUND LAMP TEMPERATURE]
projector.
14 [LAMP RUNTIME]
[SELF TEST]
16 [PROJECTOR RUNTIME]
Error information page
[Projector status] screen, click it to display the
f The projector may go into the standby status to protect the projector depending on the contents of the error.
1 Self-diagnosis result display
[OK]:
[FAILED]:
r [FAILED] items
Item Description
The air intake temperature is too high. The projector may be used in an environment
where the temperature is high, such as near a heating appliance.
lamp.
The lamp has failed to turn on. Wait a while until the luminous lamp cools off, and then
turn on the power.
*1
*1
dealer.
dealer.
(x page 131)
(x page 130)
(x page 48)(x page 130)
*1
To Next Page
Loading...
