Chapter 4 Settings — [POSITION] menu
[VID AUTO]
*1
signals.
[AUTO]
signals.
[NATIVE]
[WIDE]
*3
images without changing the aspect ratio when wide-screen signals are input
*4
.
[4:3]
*3
signals are input
*2
.
[H FIT]
with the top and bottom parts cut off.
[V FIT]
signals have the aspect ratio horizontally longer than the aspect ratio of the screen selected in
[FULL]
the input signals differs from that of the screen range, the images are displayed with the aspect ratio
*1
*2
*3
*4
Note
f
f
Be careful of this when selecting the aspect ratio.
f
adjusting the aspect ratio or using the zoom function to change the screen images may be an infringement of the rights of the original
copyright owner for that program under copyright protection laws. Take care when using a function of the projector such as the aspect ratio
adjustment and zoom function.
f
creator of the images.
[ZOOM]
You can adjust the image size.
When [ASPECT] is set to other than [NORMAL] and [NATIVE]
1) Press as to select [ZOOM].
f The [ZOOM] screen is displayed.
3) Press as to select [INTERLOCKED].
4) Press qw to switch the item.
[OFF]
[ON]
Press as to select [VERTICAL] or [HORIZONTAL].
f
6) Press qw to adjust.
Note
f
To Next Page
Loading...
