When an indicator lights up
Attention
f When switching off the projector to deal with problems, make sure to follow the procedure in x page 48).
Lamp indicator <LAMP>
Temperature indicator <TEMP>
Filter indicator <FILTER>
Lamp indicator <LAMP>
Indicator status
Lighting in red
(1 time)
(3 times)
Status
Time to replace the lamp
unit. (x page 131)
The lamp unit is not
installed.
the lamp.
Cause
f
displayed when you
turned on the power?
f The indicator lights up
when the runtime of
the lamp unit reaches
3 800 hours (when
f
f
power again immediately
after turning it off?
f
the source voltage.
Solution
f Replace the lamp unit.
f
not installed.
f
having installed the lamp
unit, consult your dealer.
f Wait a while until the
luminous lamp cools
off, and then turn on the
power.
f
(x page 48), and
consult your dealer.
Note
f
To Next Page
Loading...
