Chapter 3 Basic Operations — Switching on/off the projector
Initial setting (display language)
1) Press as to select the display language.
ENTER
1/4
Please select DISPLAY LANGUAGE.
INITIAL SETTING
SELECT
SET
Initial setting (installation setting)
x page 30) for details.
→
1) Press qw to switch the setting.
2/4
INITIAL SETTING
FRONT/FLOOR
PROJECTION METHOD
Change the projection method if the screen display is
upside down or inverted.
CHANGE
SET
ENTER
→→
1) Press qw to switch the setting.
3/4
ENTER
SET
CHANGE
If STANDBY MODE is set to ECO, you cannot use
network functions when the projector is standing by.
Also, you cannot use some RS-232C protocol
commands.
STANDBY MODE
ECO
INITIAL SETTING
To Next Page
Loading...
