Panasonic PT-EW650

Chapter 4 Settings — Menu navigation
ENGLISH - 65
Sub-menu item Factory default Page
[BACK COLOR] [BLUE] 89
[WIDE MODE] [AUTO] 89
[SXGA MODE] [AUTO] 89
[P-TIMER] - 89
[OTHER FUNCTIONS] - 90
*1 Only for PT-EZ590, PT-EW650 and PT-EX620
[PROJECTOR SETUP]
Sub-menu item Factory default Page
[STATUS] - 92
[PROJECTOR ID] [ALL] 92
[INITIAL START UP] [LAST MEMORY] 92
[PROJECTION METHOD] [AUTO] 93
[LAMP POWER] [NORMAL] 93
[ECO MANAGEMENT] - 93
[RS-232C] - 95
[REMOTE1 MODE] [DEFAULT] 96
[FUNCTION BUTTON] - 96
[AUDIO SETTING] - 97
[TEST PATTERN] - 99
[FILTER COUNTER] - 99
[SCHEDULE] [OFF] 100
[DATE AND TIME] - 102
[LENS CALIBRATION] - 102
[INITIALIZE ALL] - 103
[SERVICE PASSWORD] - 103
[SECURITY]
Sub-menu item Factory Default Page
[PASSWORD] [OFF] 104
[PASSWORD CHANGE] - 104
[DISPLAY SETTING] [OFF] 104
[TEXT CHANGE] - 105
[MENU LOCK] [OFF] 105
[MENU LOCK PASSWORD] - 105
[CONTROL DEVICE SETUP] - 105
[NETWORK]
Sub-menu item Factory default Page
[DIGITAL LINK MODE]
*1
[AUTO] 107
[DIGITAL LINK STATUS]
*1
- 107
[DIGITAL LINK MENU]
*1
- 108
[WIRED LAN] - 108
[PROJECTOR NAME] [Name 1234]
*2
108
[NETWORK CONTROL] - 109
[NETWORK STATUS] - 109
[INITIALIZE] - 110
*1 Only for PT-EZ590, PT-EW650 and PT-EX620
*2 It will be different for each product.
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
f
Sub-menu items and factory default settings vary depending on the selected input terminal.