Panasonic PT-EX500U

Technical Information
Appendix
ENGLISH -
105
J
Cable specications
[When connected to a computer]
Projector
1 NC NC 1
Computer (DTE
specications)
2 2
3 3
4 NC NC 4
5 5
6 NC NC 6
7 7
8 8
9 NC NC 9
J
Control commands
When controlling the projector from a computer, the following commands are available:
[Projector control command]
Command Control contents Remarks
PON Power [ON]
POF Power [OFF]
IIS INPUT selection
(Parameter)
PC1 = PC1
PC2 = PC2
RG1 = RGB1
RG2 = RGB2
CP1 = INPUT 2 :Y, Pb/Cb, Pr/Cr
CP2 = INPUT 3 :Y, Pb/Cb, Pr/Cr
VD1 = INPUT 2 VIDEO
VD2 = INPUT 3 VIDEO
SVD = S-VIDEO
DVI = DVI
HD1 = HDMI
SCT = Scart
OSH AV mute function
Turn off the projection and sound temporarily.
Do not send the command consecutively.
(Parameters)
0 = AV MUTE mode off
1 = AV MUTE mode on
OFZ Freeze
(Parameters)
0 = Freeze mode off
1 = Freeze mode on
AUU Volume up
AUD Volume down
DZU D. ZOOM up
DZD D. ZOOM down
QPW Power query
000 = Standby
001 = Power on
Q$S
Lamp condition
query
(Call back)
0 = Stand-by
1 = Lamp ON control active
2 = Lamp ON
3 = Lamp OFF control active