Basic operations by using the remote control
42
- ENGLISH
Basic Operation
Using the MENU button
This function allows you to open or close the On-
Screen Menu.
button
Press the <MENU> button on the remote
control.
Note
For details, please refer to “Menu Navigation”.
z
(
Æ
page 46)
Using the AUTO PC ADJ
button
This function allows you to adjust the computer screen
easily.
button
Press the <AUTO PC ADJ> button on the
remote control.
Note
For details, see “Auto PC adjust” of Main menu.
z
(
Æ
page 51)
Controlling the volume of the
speaker
You can control the volume of the projector’s speaker
or audio output.
buttons
Press the <VOL> (-/+) buttons on the side control
or on the remote control to adjust the volume. The
volume dialog box appears on the screen for a few
seconds.
Note
For details, see “Volume” of "Sound" under Main menu.
z
(
Æ
page 61)
Using the IMAGE SELECT
button
This function allows you to operate the image
selection directly.
button
Press the <IMAGE SELECT> button on
the remote control.
Note
For details, see “Image select” of Main menu.
z
(
Æ
page 54)
Using the MUTE button
Press this button on the remote control to temporarily
turn off the sound.
button
Press <MUTE> button on the remote
control.
Note
To turn the sound back on, press this button again or
z
press the <VOL> (-/+) buttons. (
Æ
page 61)
Using the IMAGE ADJUST
button
This function allows you to adjust the image.
button
Press the <IMAGE ADJUST> button on
the remote control.
Note
For details, see “Image adjust” of Main menu.
z
(
Æ
page 55)
To Next Page
Loading...
