Panasonic PT-EX500U

Menu Navigation
ENGLISH -
47
Settings
Main menu
The main menu consists of the following 9 menu
items.
When a main menu item is selected, the screen
changes to a submenu selection screen.
Input
PC adjust
Image select
Image adjust
Screen
Sound
Setting
Information
Network
Sub menu
The sub-menu screen of the selected main menu
appears, and you can set and adjust the various items
in the submenu.
Input [
J
]
Sub-menu item Factory default Page
Input 1 RGB(PC analog) 49
Input 2 Video 49
Input 3 Video 49
J
PC adjust [ ]
Sub-menu item Factory default Page
Auto PC adj. - 51
Fine sync. - 52
Total dots - 52
Position H - 52
Position V - 52
Sub-menu item Factory default Page
Current mode - 53
Clamp - 53
Display area H - 53
Display area V - 53
Reset - 53
Mode free - 53
Store - 53
Note
This function will be available when the input source
z
come from computer.
J
Image select [ ]
Sub-menu item Factory default Page
Dynamic - 54
Standard - 54
Real - 54
Cinema*
1
- 54
Natural*
1
- 54
Image 1-10 - 54
When input video signal to the projector, these *1 :
functions will be available.
J
Image adjust [ ]
Sub-menu item Factory default Page
Contrast 32 55
Brightness 32 55
Color*
1
32 55
Tint*
1
32 55
Iris*
2
- 55
Color temp. Mid 56
Red 32 56
Green 32 56
Blue 32 56
Offset 32 56
Daylight View Auto 56
Sharpness*
3
8 57
Gamma 8 57
Noise Reduction*
1
On 57
Progressive*
1
On 57
Reset - 57
Store - 57
When input video signal to the projector, these *1 :
functions will be available.
EZ570 series, EW630 series and EX600 series Only.*2 :
When input computer signal, the factory default of *3 :
[Sharpness] is 8. When input video signal, the factory
default of [Sharpness] is 15.