Input menu
50
- ENGLISH
Settings
Y, Pb/Cb, Pr/Cr
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
Y, Pb/Cb, Pr/Cr SIGNAL FORMAT
If the projector cannot reproduce proper video image,
select a specific component video signal format
among [480i], [576i], [480p], [576p], [720p], [1 035i]
[1 080i] and [1 080p].
Press ▲▼ to select [System].1 )
Press ► or the <ENTER> button to 2 )
access the submenu.
Press ▲▼ to select the desired system.3 )
Note
The AV System Menu cannot be selected when selecting
z
[RGB (Scart)].
To Next Page
Loading...
