Panasonic PT-EZ570UL

Menu Navigation
48
- ENGLISH
Settings
Main menu
The main menu consists of the following 9 menu
items.
When a main menu item is selected, the screen
changes to a submenu selection screen.
Input
PC adjust
Image select
Image adjust
Screen
Sound
Setting
Information
Network
Sub menu
The sub-menu screen of the selected main menu
appears, and you can set and adjust the various items
in the submenu.
Input [
J
]
Sub-menu item Factory default Page
Input 1 RGB(PC analog) 50
Input 2 Video 50
Input 3 Video 50
J
PC adjust [ ]
Sub-menu item Factory default Page
Auto PC adj. - 52
Fine sync. - 53
Total dots - 53
Position H - 53
Position V - 53
Sub-menu item Factory default Page
Current mode - 54
Clamp - 54
Display area H - 54
Display area V - 54
Reset - 54
Mode free - 54
Store - 54
Note
This function will be available when the input source
z
come from computer.
J
Image select [ ]
Sub-menu item Factory default Page
Dynamic - 55
Standard - 55
Real - 55
Cinema*
1
- 55
Natural*
1
- 55
Image 1-10 - 55
When input video signal to the projector, these *1 :
functions will be available.
J
Image adjust [ ]
Sub-menu item Factory default Page
Contrast 32 56
Brightness 32 56
Color*
1
32 56
Tint*
1
32 56
Iris*
2
- 57
Color temp. Mid 57
Red 32 57
Green 32 57
Blue 32 57
Offset 32 57
Daylight View Auto 57
Sharpness*
3
8 58
Gamma 8 58
Noise Reduction*
1
On 58
Progressive*
1
On 58
Reset - 58
Store - 58
When input video signal to the projector, these *1 :
functions will be available.
EZ570 series, EW630 series and EX600 series Only.*2 :
When input computer signal, the factory default of *3 :
[Sharpness] is 8. When input video signal, the factory
default of [Sharpness] is 15.