About indicator status
ENGLISH -
91
Maintenance
When there is a problem with internal temperature
J
The status of the indicator is displayed with the following symbols.
: Off, : On,
: Flashing, : Off or On or Flashing
Indicators
Status of the projector
<ON(G)/
STANDBY(R)>
Green/Red/
Orange
<TEMP>
Red
<FILTER>
Orange
<SHUTTER/
AV MUTE>
Blue
<LAMP>
Orange
//
*
1
*
2
*
2
*
2
If the temperature within the projector becomes
too high, the temperature indicator <TEMP> will
start to flash slowly.
//
*
3
*
4
*
2
*
2
*
2
If the temperature within the projector becomes
even higher, the temperature indicator <TEMP>
will flash faster, the power indicator <ON(G)/
STANDBY(R)> will turn off, and the projector
will turn off automatically.
The projector will not turn back on even
when pressing the <POWER ON> button on
the remote control or the < > button on
the side control. When the projector returns
to the normal operating temperature, the
standby indicator <ON(G)/STANDBY(R)> will
change to on. The projector will turn back on
when pressing the <POWER ON> button on
the remote control or the < > button on
the side control. (The temperature indicator
<TEMP> will remain flashing.) Check the air
filter.
//
*
3
*
4
*
1
*
1
*
1
The projector has cooled inside, and returned
to operating temperature. Pressing the
<POWER ON> button on the remote control
or the < > button on the side control will
make the temperature indicator <TEMP> stop
flashing and operate the projector. Check the
air filter.
*1: The indicator will ash in approximately 2-second intervals.
*2: The
indicator will change according to different conditions, regardless of the status of other indicators.
*3: The indicator will ash in approximately 1-second intervals.
*4: The indicator will ash in approximately 0.5-second intervals.
To Next Page
Loading...
