Panasonic PT-FW100NTU

Settings
Menu Navigation
ENGLISH - 28
The Main menu has 6 options. Select the required menu item and press ENTER to display the Sub-menu.
Main menu and Sub-menu
NOTE:
• Some default settings vary by the selected input signal.
• Sub-menu items vary according to the selected input signal.
• Some settings are adjustable without any signals.
Main menu Sub-menu Options ( * is default setting) Page
PICTURE PICTURE MODE NATURAL
DYNAMIC
*1
*1. Default setting for COMPUTER/COMPONENT signals
page 30
STANDARD* BLACKBOARD
CONTRAST • Default: 0 page 30
BRIGHTNESS • Default: 0 page 30
COLOR
*2
*2. Not available with COMPUTER/NETWORK signals
• Default: 0 page 30
TINT
*2
• Default: 0 page 30
SHARPNESS • Default: 0 page 30
COLOR TEMPERATURE LOW STANDARD* page 30
HIGH
DAYLIGHT VIEW AUTO* ON page 30
OFF
DETAILED SETUP
*3
*3. VIDEO/S-VIDEO/COMPUTER signals only
WHITE BALANCE
*4
*4. COMPUTER signals only
WHITE BALANCE RED page 31
WHITE BALANCE GREEN
• Default: 0 WHITE BALANCE BLUE
TV-SYSTEM AUTO* NTSC
(S-VIDEO/VIDEO
signals only)
NTSC 4.43 PAL
PAL-M PAL-N
SECAM
STILL MODE OFF*
(S-VIDEO/VIDEO) ON
NOISE REDUCTION ON*
(S-VIDEO/VIDEO) OFF
POSITION
KEYSTONE
*5
*5. Only KEYSTONE is available with NETWORK signals
• Default: 0 page 32
POSITION H • Default: 0 page 32
V • Default: 0
DOT CLOCK
*4
• Default: 0 page 32
CLOCK PHASE
*6
*6. COMPUTER/COMPONENT signals only
• Default: 0 page 32
ASPECT 4:3 S4:3 page 32
16:9* AUTO
FRAME LOCK OFF* ON page 33
LANGUAGE