Chapter 4
Settings — Menu navigation
ENGLISH - 57
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
button
1) Press the <MENU> button on the remote control or the control panel.
f
The main menu screen appears.
2) Press as to select an item from the main menu.
f
The selected item is highlighted in yellow.
3) Press the <ENTER> button.
f
The sub-menu items of the selected main menu are displayed.
4) Press as to select a sub-menu, and press qw or the <ENTER> button to change or adjust settings.
f
Some items will switch in order as follows each time you press
qw
.
A B C
f
For some items, press
qw
to display an individual adjustment screen with a bar scale as shown below.
To Next Page
Loading...
