ENGLISH - 15
Features of the Projector
Variety of projection function
▶ The lighting mode just like a spotlight and
the projector mode that can project image
can be switched in just one touch.
▶ Various playback method can be selected,
such as projecting the still image/movie
in the SD card just with the projector,
projecting the image in the computer by
transmitting it wirelessly, projecting the
contents of the Blu-ray disc via HDMI.
▶ The signage function is installed allowing
to play back the still image/movie/music
le in the SD card, change the brightness
of the light source, and turn off/on the
projector according to the schedule
created by yourself.
Easy setup and improved
serviceability
▶ Two installation methods of ceiling mount
and oor standing are supported
*1
.
▶ The display can be freely layout by
projecting the image vertically or
horizontally.
▶ The projector is equipped with an electric
2.2x zoom, electric focus lens.
*1 This product is used in combination with the optional Ceiling
Kit or Floor Stand Kit. This product cannot be used by itself.
A design tting in to the space
▶ A spotlight type design is adopted to easily
conform to a space requiring conformity to
the design, such as a store.
Quick Steps
For details, refer to the corresponding pages.
1. Install the projector in
combination with the optional
accessory.
(x page 36)
f Be sure to ask your dealer or a building
electrician for installing the projector to the
ceiling with the optional Ceiling Kit. To use
the projector standing on the oor, refer to
the Operating Instructions of the Floor Stand
Kit.
2. Connect with external devices.
(x page 38)
3. Switch on the projector.
(x page 42)
4. Make initial settings.
(x page 42)
f Take this step when you switch on the
power for the rst time after purchasing the
projector.
5. Select the projection mode.
(x page 47)
6. Select the input to project.
(x page 47)
f This is a step to perform when the projector
mode is selected.
7. Adjust the projection.
(x page 48)
To Next Page
Loading...
