Panasonic PT-JW130FBE

Chapter 5 Operations — Content Manager
188 - ENGLISH
4) Select the content to register (1 file at a time), and click the [Open] button.
f The content name entry screen is displayed.
5) Enter any [Content name], and click the [Enter] button.
f For [Content name], up to 24 characters in single byte can be entered.
f Even when the content name is different from the le name, the le name itself is not changed.
f The content is registered in the [Add content] screen.
Content deletion
f To continue to add content, go back to Step 3), or to delete content from the [Add content] screen, go to
Step 6), and to end adding content, proceed to Step 10).
f Up to 10 contents can be registered in the [Add content] screen.
6) To cancel addition of content, click on the [Add content] screen.
f The mode changes to deletion mode.
7) Select the content for which you want to cancel addition.
f You can select multiple contents.
8) Click the [Delete] button.
9) When the confirmation screen is displayed, click the [OK] button.
10) When addition of contents to register is complete, click the [Save] button.
f Added contents are registered in the SD card.
Note
f The maximum number of still image/movie les that the Content Manager can control is 500 each.
However, it may not be possible to register 500 les depending on the capacity of the SD card.