Chapter 5 Operations — Web control function
ENGLISH - 115
[Ping test] page
Check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
1
2
3
4
1 [Input IP address]
Enter the IP address of the server to be tested.
2 [Submit] button
Executes the connection test.
3 Example of display when the connection has succeeded
4 Example of display when the connection has failed
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up] → [ECO management set up].
1
2
3
1 [LIGHT POWER]
Select the light source power setting.
2 [NO SIGNAL SHUT-OFF]
When [NO SIGNAL SHUT-OFF] is used, select the time until the
projector goes into the standby status.
3 [Submit] button
Updates the settings.
Note
f For details of each setting item, refer to the [SETUP] menu → [ECO MANAGEMENT] (x page 71) of the projector.
To Next Page
Loading...
