Chapter 3 Basic Operations — Projecting
48 - ENGLISH
Adjusting the projection
Adjust focus and zoom.
1) Press the <FOCUS> or <ZOOM> button on the remote control.
f <FOCUS> button: Adjusts focus.
f <ZOOM> button: Adjusts zoom.
2) Select each item and press asqw to adjust it.
Note
f When a projection position is required to be adjusted, adjust according to the steps described in “Adjusting the projection position”
(x page 36).
f The operation can be sped up by pressing asqw for at least one second.
f It is recommended to adjust the focus after 30 minutes have elapsed projecting.
f Only [FOCUS] is shown in yellow so that the displayed menu item can be recognized by color, even when the projector is not focused and
displayed characters are unreadable.
To Next Page
Loading...
