Control Commands
6.4. Basic Format
The data sent from the PC to the projector is transmitted in the format shown below.
Notes:
·
If sending multiple commands, check that a call back has been received from the projector for 1 command before sending
the next command.
·
When a command which does not require parameters is sent, the colon (:) is not required.
6.5. Control / Query Commands
11
PT-LB20NTU / PT-LB20NTE / PT-LB20NTEA / PT-LB20U / PT-LB20E / PT-LB20EA / PT-LB20SU / PT-LB20SE / PT-LB20SEA / PT-LB20VU / PT-LB20VE / PT-LB20VEA
To Next Page
Loading...
