31
You can simultaneously project one computer’s screen on up to eight projectors.
Click [ ] of the launcher.
The “Select Access Port” window appears.
2
Press the [MULTI-LIVE SELECT] button on the remote
control to turn the projection screen into a full
screen display (the status when no index window is
displayed).
If you press the [MULTI-LIVE SELECT] button once or twice when index
windows are displayed on the projection screen, the screen will switch over to
a full screen display.
1
Select the network number of the desired projectors
from [Network].
Projectors powered on in the chosen network group are listed.
4
Click [ ] of [Access Device].
3
Select the desired projectors, and click [OK].
Selected projectors are displayed in pink.
If click again, selected items are canceled.
If click [OK], the connection with the projectors is established.
5
Various projection methods
(cont.)
Multiple Source Live Mode
To Next Page
Loading...
