49
If you selected one of [USER1] to [USER3] for [NETWORK] in the wireless menu,
you can make detailed network settings. Confirm to your system administrator before
changing any settings.
Network setting of the projector (cont.)
[User] settings
How to display IP address setting menu
Press [NETWORK]→[USER1]-[USER3]→[ENTER] on
wireless menu.
DHCP
※
:
ON: If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired.
OFF: If a DHCP server does not exist in the network to which the projector
is connected, additionally set [IP ADDRESS
※
], [SUBNETMASK
※
] and
[GATEWAY
※
].
※“Glossary” (See page 61)
IP address settings
To Next Page
Loading...
