65
Frequently Asked Questions (cont.)
No wireless connection can be made between my projector and my computer. (cont.)
<When Windows Firewall has been detected>
① Has your firewall in Windows XP been disabled?
The firewall in Windows XP must be disabled in order to connect to a wireless
network.
How to disable the firewall in Windows XP
1. Click [Start] → [Control Panel] → [Network and Internet Connections] →
[Network Connections].
2. Right-click [Wireless Network Connection] and click [Properties] in the
pulldown menu.
3. Click the [Advanced] tab and set the [Internet Connection Firewall] checkbox
to OFF.
② Is Wireless Manager ME 3.0 registered in [Exceptions] ([Control Panel] →
[Security Center] → [Windows firewall]) with the Windows XP SP 2?
Register Wireless Manager ME 3.0 in the Exceptions to Application List of the
firewall.
How to register
1. Click [Start] → [Control Panel].
2. Click [Security Center] → [Windows Firewall] when [Control Panel] window
opens.
3. Click the [Exceptions] tab and then [Add Program…] when the [Windows
Firewall] window opens.
4. Click [Wireless Manager mobile edition 3.0 (WM.exe)] to allow connection
with external devices under [Programs] when the [Add a Program] window
opens.
If [Wireless Manager mobile edition 3.0 (WM.exe)] does not appear on the
list of programs, click [Browse...] and select [WM.exe].
5. Click the [Change scope…] button at the lower left of the window.
When the [Change Scope] window opens, select the desired network as
described below.
6. Select [Any computer (including computers on the internet)].
7. Select the scope and click [OK].
8. Click [OK] in the [Add a Program] window.
9. Click [OK] in the [Windows Firewall] window.
With this, the Wireless Manager ME 3.0 firewall will be deleted.
To Next Page
Loading...
