Basic operations by using the remote control
32
- ENGLISH
Basic Operation
Operation Screen image
Reduce the
upper width
with press
▲
.
Reduce the
lower width
with press
▼
.
Note
The white arrows indicate that there is no correction.
z
A red arrow indicates the direction of correction.
z
An arrow disappears at the maximum correction.
z
If you press the <KEYSTONE> button on the remote
z
control once more while the keystone dialog box is being
displayed, the keystone adjustment will be canceled
(
Æ
page 47).
The adjustable range is limited depending on the input
z
signal.
Using the INFO. button
This function allows you to display the [information]
menu.
Button
Press <INFO.> button on the remote
control.
Note
For details, see “Input Source Information Display ” in
z
“Information” under Main menu (
Æ
page 57).
Using the FREEZE function
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
Button
Press the <FREEZE> button on the remote control to
freeze the picture on the screen, meanwhile, volume
is muted. To cancel the [Freeze] function, press the
<FREEZE> button again or press any other button.
Fig.1 will appear on the screen while the [Freeze]
function is working.
Fig.
Using the AV MUTE function
Button
Press the < AV MUTE> button on the remote control
to black out the image. To restore to normal, press
the < AV MUTE> button again or press any button.
When the
z
Logo is not set, the screen changes each
time you press the < AV MUTE> button as follows.
black out
projected image
When the projected Logo
z
(the logo can be set according
to users’ favorite) is transferred from computer to
the projector by “Logo Transfer Software” on the
supplied CD-ROM and is set as [User] in the Logo
selection (
Æ
page 51), the screen changes each time
you press the < AV MUTE> button as follows.
black out
projected image
Logo
Note
When use the <MUTE> button to release the [
z
AV mute]
function, the [mute] function cannot be operated at the
same time.
To Next Page
Loading...
