Panasonic PT-LX26HE

Basic operations by using the remote control
ENGLISH -
33
Basic Operation
Using the P-TIMER button
Press the <P-TIMER> button on the remote control to
operate the [Count up/Count down] function.
Button
Press <P-TIMER> button on the remote
control.
Note
To stop the count time, press the <P-TIMER> button.
z
To cancel the [P-timer] function, press and hold the
<P-TIMER> button. (
Æ
page 53)
Using the LAMP button
This function allows you to select the lamp mode for
changing the brightness on the screen.
Button
Press <LAMP> button on the remote
control.
Note
For details, see “Lamp Power” of "Setting" under Main
z
menu. (
Æ
page 54)
Using the D.ZOOM buttons
This function allows you to enter to the Digital zoom
+/– mode.
Buttons
Press <D.ZOOM+/-> buttons on the
remote control.
Note
For details, see "Screen" of Main menu. (
z
Æ
page 46)
Controlling the volume of the
speaker
You can control the volume of the projector’s speaker.
Buttons
Press the <VOLUME+/–>buttons on the top control
or on the remote control to adjust the volume. The
volume dialog box appears on the screen for a few
seconds.
Note
For details, see “Volume” of "Sound" under Main menu.
z
(
Æ
page 49)
Using the IMAGE button
This function allows you to select a desired image
mode of the screen.
Button
Press <IMAGE> button on the remote control to select
the desired image mode among [Dynamic], [Standard],
[Real], [Cinema], [Blackboard (Green)], [Colorboard],
[Image 1], [Image 2], [Image 3] and [Image 4].
Using the MUTE button
Press this button on the remote control to select [On]
to temporarily turn off the sound.
Button
Press <MUTE> button on the remote
control.
Note
To turn the sound back on, press this button again or
z
press the <VOLUME+/–> buttons. (
Æ
page 49)