Input menu
38
- ENGLISH
Settings
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image,
select a specific component video signal format
among [480i], [576i], [480p], [576p], [720p], [1035i]
and [1080i].
Press ▲▼ to select [System].1 )
Press ► or the <SELECT> button to 2 )
access the submenu.
Press ▲▼ to select the desired system.3 )
Attention
When the [Input Search] function is set to [On1] or [On2]
z
in the [Auto setup] function, the input signal will be
searched automatically.
The [AV System Menu] cannot be selected when
z
selecting [RGB (Scart)].
To Next Page
Loading...
