Technical information
ENGLISH - 113
Appendix
<SERIAL> terminal
The <SERIAL> terminal of the projector conforms with RS-232C so that the projector can be connected to and
controlled from a computer.
Connection
<Connecting terminals on projector>
D-Sub 9-pin (female)
Communication cable
Computer
D-Sub 9-pin (male)
Pin assignments and signal names
D-Sub 9-pin (female)
Outside view
Pin No. Signal name Details
(6)
(1)
(9)
(5)
(1) — NC
(2) TXD Transmitted data
(3) RXD Received data
(4) — NC
(5) GND Earth
(6) — NC
(7) CTS
Connected internally
(8) RTS
(9) — NC
Communication conditions
Signal level RS-232C-compliant Character length 8 bits
Sync. method Asynchronous Stop bit 1 bit
Baud rate 9 600 bps X parameter None
Parity None S parameter None
To Next Page
Loading...
