Panasonic PT-LZ370U

Technical information
ENGLISH - 117
Appendix
Mode Signal name
Resolution
(Dots)
Scanning
frequency
Dot clock
Frequency
(MHz)
Format
*1
Plug and play
Horizontal
(kHz)
Vertical
(Hz)
Computer HDMI
MSXGA MSXGA60 1 280 x 960 60.0 60.0 108.0 R — —
SXGA SXGA60 1 280 x 1 024 64.0 60.0 108.0 R/H
3 3
SXGA75 1 280 x 1 024 80.0 75.0 135.0 R — —
SXGA85 1 280 x 1 024 91.1 85.0 157.5 R — —
SXGA+ SXGA+60 1 400 x 1 050 64.0 60.0 108.0 R — —
SXGA+60 1 400 x 1 050 65.2 60.0 122.6 R/H
3 3
SXGA+75 1 400 x 1 050 82.2 75.0 155.9 R — —
WXGA+ WXGA+60 1 440 x 900 55.9 59.9 106.5 R
3
—
UXGA UXGA60 1 600 x 1 200 75.0 60.0 162.0 R/H
3 3
WSXGA+ WSXGA+60 1 680 x 1 050 65.3 60.0 146.3 R — —
1920 x 1080 1920 x 1080/60 1 920 x 1 080
*2
66.6 59.9 138.5 R/H
3
—
1920 x 1080/50 1 920 x 1 080 55.6 49.9 141.5 R/H — —
WUXGA WUXGA60RB 1 920 x 1 200
*2
74.0 60.0 154.0 R — —
*1: Abbreviation for the format means the following.
V: Video
S: S-video
R: RGB
Y: YC
B
C
R
/YP
B
P
R
H: HDMI
*2: VESA CVT-RB (Reduced Blanking) compatible
Note
z
The number of display dots of PT-LZ370U is 1 920 x 1 080.
A signal with a different resolution will be projected after converting the resolution to match the projector
display.
z
The “i” at the end of the resolution indicates an interlaced signal.
z
When interlaced signals are connected, icker may occur on the projected image.