Chapter 3 Basic Operations — Switching on/off the projector
62 - ENGLISH
Initial setting (screen setting)
Set the screen format (aspect ratio) and display position of the image.
After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu →
[SCREEN SETTING].
1) Press qw to switch the setting.
f Proceed to Step 4) when [16:10] is selected.
16:10
4/6
SCREEN POSITION
Set as necessary for the screen in use.
INITIAL SETTING
SET
CHANGE
SCREEN FORMAT
ENTER
2) Press as to select [SCREEN POSITION].
16:9
0
4/6
SCREEN POSITION
Set as necessary for the screen in use.
INITIAL SETTING
SET
CHANGE
SCREEN FORMAT
ENTER
MENU SELECT
3) Press qw to adjust.
f The display position can be adjusted vertically when [16:9] is selected in [SCREEN FORMAT], and adjusted
horizontally when [4:3] is selected.
4) Press the <ENTER> button to proceed to the initial setting.
To Next Page
Loading...
