Panasonic PT-REQ10 - [Menu Mode]

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 145
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
Holds the cursor position.
[OFF]
Does not hold the cursor position.
Note
f The cursor position is not maintained even if [OSD MEMORY] is set to [ON].
Setting [INPUT GUIDE]
Set whether to display the input guide in the position set in [OSD POSITION].
Input guide is a screen to display information such as the currently selected input name, signal name, memory
number, [BACKUP INPUT STATUS], etc.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [INPUT GUIDE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
Displays the input guide.
[OFF]
Hides the input guide.
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [WARNING MESSAGE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
Displays the warning message.
[OFF]
Hides the warning message.
Note
f If [OFF] is set, the warning message will not be displayed on the projected image even when warning condition such as [TEMPERATURE
WARNING] is detected while using the projector. Also, the following countdown message is not displayed: the message until the power
is turned o󰀨 after the no signal shut‑o󰀨 function is executed; the message until the light source is turned o󰀨 after the no signal lights‑out
function is executed
[MENU MODE]
Set the display mode of the menu screen (OSD).
1) Press as to select [MENU MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
Displays all menu items.
[SIMPLE]
Displays some of the menu items that are used for basic setting or adjustment.
Note
f For the menu items that are displayed when [SIMPLE] is set, refer to “Main menu” (x page 93), “Sub-menu” (x page 94).