Panasonic PT-RS20K

Other manuals for Panasonic PT-RS20K

Questions and Answers:

K
Kelly WilliamsSep 2, 2025
Why is my Panasonic PT-RS20K Projector remote control not working?
- D
  Devon SchmidtSep 2, 2025
  If the remote control for your Panasonic Projector isn't responding, check if the batteries are depleted and ensure their polarity is correct. Verify that the button operation isn't disabled by the button and that there are no obstructions between the remote and the projector's receiver. Ensure the remote is within its effective range and that other light sources aren't interfering. Check if the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] is set to [DISABLE], or if the terminal is used for contact control. Finally, verify the ID number setting operation is correct.
C
Christina Henry MDSep 15, 2025
How to troubleshoot Panasonic PT-RS20K Projector image display issues?
- K
  Kimberly BeckSep 16, 2025
  If the image on your Panasonic Projector does not display correctly, ensure the [SYSTEM SELECTOR] selection is set correctly and that the [RGB1 INPUT SETTING] is also correctly configured. Check for any problems with the external device outputting images and ensure that a signal compatible with the projector is being input.
E
Elizabeth ButlerAug 31, 2025
What to do if my Panasonic PT-RS20K Projector has no image?
- S
  Stuart WalterSep 1, 2025
  If your Panasonic Projector displays no image, first check if the connections to external devices are correctly performed. Ensure the correct image input is selected and that the [BRIGHTNESS] adjustment isn't at its minimum. Verify the external device connected to the projector is working properly and that the shutter function is not in use. Confirm the projection lens is attached correctly and the lens cover is removed. If the power indicator is blinking red, consult your dealer.
P
paul07Sep 18, 2025
How to control Panasonic Projector with Art-Net?
- J
  Jeffrey KramerSep 18, 2025
  If you cannot control the Panasonic Projector with Art-Net, ensure the connections between the twisted-pair-cable transmitter and external device, and between the transmitter and projector, are correctly established. Verify that [Art-Net SETUP] is set to other than [OFF], and that [NET], [SUB NET], [UNIVERSE], and [START ADDRESS] are set correctly.
J
Jeremy CarlsonSep 18, 2025
Why can't I adjust the lens shift on my Panasonic Projector?
- L
  lisawilliamsSep 18, 2025
  If the lens shift on your Panasonic Projector cannot be adjusted, try performing [LENS CALIBRATION]. Also, verify if the Fixed-focus Lens (Model No.: ET-D75LE50) is attached.
W
williamharveySep 23, 2025
What to do if Panasonic PT-RS20K 3D eyewear is not working?
- C
  Chad MartinSep 23, 2025
  If the 3D eyewear is not functioning with your Panasonic Projector, check if the battery is dead. Charge the rechargeable 3D eyewear or replace the battery for the battery type. Also, verify that the [3D SETTINGS] are correct.
M
Matthew AlexanderAug 28, 2025
What to do if image output from DVI-D of computer does not appear on Panasonic PT-RS20K Projector?
- C
  Cesar AdamsAug 28, 2025
  If the image output from DVI-D of the computer does not appear on your Panasonic Projector, check if [EDID SELECT] in [DVI-D IN] is set to [EDID3] or [EDID2:PC]. You may also need to update the graphics accelerator driver of the computer to the latest version. Additionally, making the [EDID SELECT] setting in [DVI-D IN] and then restarting the computer may improve the condition.
M
Ms. Elizabeth JonesAug 27, 2025
What to do if DIGITAL LINK input image is not displayed on Panasonic Projector?
- C
  christopher55Aug 27, 2025
  If the DIGITAL LINK input image is not displayed on your Panasonic Projector, verify that the cable is compatible with the projector's condition. Also, ensure that the connections between the twisted-pair-cable transmitter and the projector or an external device are correctly done. Check that [DIGITAL LINK MODE] is set to [AUTO], [DIGITAL LINK], or [LONG REACH] and not set to [ETHERNET]. Finally, confirm that a compatible signal is being input to the twisted-pair-cable transmitter.
J
Jeremy WilliamsAug 26, 2025
How to fix Panasonic PT-RS20K Projector when image from computer does not appear?
- J
  Jamie DudleyAug 26, 2025
  If the image from a computer does not appear on your Panasonic Projector, ensure that the cable is not too long (if using D-Sub cables, the length should be 10 m (32'10") or shorter). Also, verify that the external video output on the laptop is set correctly. For example, you may need to press “Fn” + “F3” or “Fn” + “F10” simultaneously, but the method varies depending on the computer type.
M
Monique LeAug 25, 2025
Why is Panasonic PT-RS20K Projector remote control not responding?
- R
  rpatelAug 26, 2025
  If the remote control for your Panasonic Projector isn't responding, check if the batteries are depleted or if the polarity is set incorrectly. Ensure the button operation isn't disabled by the button, there are no obstructions between the remote and the projector, the remote is within its effective range, other light sources aren't interfering, the [REMOTE CONTROL] setting is not set to [DISABLE], the terminal is not in use for contact control, and the ID number setting is correct.

Panasonic PT-RS20K Specifications

General

Brightness	20, 000 lumens
Resolution	1920 x 1200 (WUXGA)
Light Source	Laser
Contrast Ratio	20, 000:1
Light Source Life	20, 000 hours
Lens Shift	Horizontal: ±30%
Input Terminals	HDMI, DVI-D, 3G-SDI